Heat recovery thermal oil boiler

Electric thermal oil heater, also known as electric heating organic heat carrier boiler, uses electricity as a power source and heat conduction oil as a heat conduction carrier. It can be used as a high-temperature heat source in various environments below 320℃, and is widely used in various needs for high temperature Various industries of heating or drying. This product has the advantages of high temperature, low pressure, accurate temperature control and high heat utilization rate. This product can also be equipped with a steam generator to produce saturated steam below 1.3MPa for users to use.

YLW series thermal oil heater is a square-coil horizontal chain grate assembly boiler, the chain grate and boiler body are separated when deliver from the factory. The boiler adopts chain grate to realize mechanical coal feeding. It is equipped with drums and induced draft fans for mechanical ventilation, and with a slag discharger to realize mechanical slag discharge. During operation, the fuel falls from the coal hopper to the grate for combustion. The high-temperature flue gas is reflected from the back arch to the front of the furnace and enters the furnace. 

Package thermal oil boiler, YGL, YLL and YQW types thermal oil boiler, these three types can make it to package type boiler, which means boiler system will be well installed in a frame at our factory, so that it will be more convenient to running on site, save much installation period. Besides, this package type boiler can be transported from one place to another place more conveniently.

YYW Series Oil Fired Thermal Oil Boiler is to use low pressure high temperature hot oil as heat source more safety than steam boiler, also it's convenient and precise for temperature control.Hot oil as heat source saving water, also no need install water treatment equipment.Avoiding the terrible of high quality water of steam boiler.

Hot Oil Boiler ProductsFuel: natural gas, light oilHeat transfer medium: molten saltOutput temperature: up to 450 degreesOutput efficiency: 92-98%Output power: 450-25000 kWOutput power: 40*104～2000*104 kcal/h

YLW series coal/biomass fired thermal oil boiler adopts square coil horizontal structure,equips with automatic fuel feeding system,mechanical ventilation system,slag remover system can slog while running.

Professional Thermal Oil Heater Manufacturers.Do you want to know the production process of thermal oil furnace? This video contains all the production processes of the thermal oil heater.This gas fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.Available fuel:natural gas, coke oven gas, bio-gas，liquid propane gas, diesel, heavy oil, light oil, crude oilAvailable industries:Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

At present, in the process of mixing and construction of asphalt, heat conduction oil furnace is generally used as the main heating and heat conduction system, so that the normal operation of the asphalt mixing plant, and people in order to ensure the normal operation of the entire heat conduction oil furnace heating system , And many advanced science and technology are applied to it, so that people can effectively control the operation of the entire asphalt mixing plant heat transfer oil furnace, so that the work performance of the asphalt mixing plant can be further improved.